custom toys

【 Plastic pet dog toy manufacturers] Five note! ! Let you choose to satisfactory baby dog toy safety

by:Zhierde     2020-12-02
In children's toys, there is a lot of plastic, but, you know how to choose plastic toys to darling? Pet toys manufacturers give you tips for baby to buy plastic toys considerations of five, you parents under study.

1. See toy 3 c authentication and label instructions

3 c authentication is short for China compulsory product certification. Regulations of the state, plastic toys to passed the national mandatory product certification, is to have 'CCC' mark. If there is no 3 c certification, product packaging that the product is fake and inferior products. 3 c mark is not a quality mark, however, is one of the most basic security certification, can only prove that the product qualified, can't prove product performance is very excellent. Also, check the manufacturer, producing area, main material composition, warning signs, such as product certification label.

2. To smell the smell of plastic toys

German consumer protection center, points out that if some children's toys have pungent odor, you should contain harmful substances, such as phthalate plasticizers such harmful substances. Therefore, we suggest that you smell smell when buying toys. Some experts suggest, can first toy washing, drying, the plastic smell volatile out as far as possible, reduce the peeling paint and heavy metal content of them. If plastic toys out and can tolerate high temperature, also can cook once again use the toys.

3. See toy glossiness and crisper

high quality plastic toys on the gloss and crisper than inferior toys more excellent performance. This is because the quality of plastic toys are usually made of PVC, PP, PE and other plastic raw materials, plastic itself is very glossy. While many inferior toys usually adopt 'material' ( The waste plastics recycling and processing of materials) And after reprocessing into color variation. Although not necessarily can ensure the safety of colour and lustre is good will, but poor gloss, bright degree difference are unsafe products.

4. See the thickness of the products

the characteristic of the large plastic toys is the finished product or component is a one-time injection molding, if inside a thin plastic toys, when children play is easy to broken, drop, plastic brittle fracture produce little pieces, sharp edges and corners, dangerous for the baby. Generally marginal or arc plastic wall thicker than other place, so that increased damage when a toy fall to the ground to bear ability, reduce the extent of damage.

5. Try

for security reasons, when mom and dad are buying toys suggest try hard, to see whether there is potential safety hazard and is suitable for the baby. At the time of trial, the sway toys to see if the parts can be solid, if there is a small parts; Or pull on the rope toys, whether length is appropriate; When choosing talking toys, want to try it's voice is too loud. Good to touch the toy detail and see if there is a sharp object, so as not to scratch the baby.
Custom message
Chat Online
Chat Online
Chat Online inputting...